Specs
General
Annual Energy Production (AEP) 2000 kWh*
Instantaneous Power Rating (IPR) 1.2 kW (1200 watts)*
Standard Unit Height 30 ft | 9.1 m
Total Weight 600 lb | 273 kg
Color Soft Silver
Sound imperceptible @ 10 mph;
8.8dB above ambient @ 50 mph
Warranty 5 year limited warranty
Rotor
Rotor Type Vertical Axis - Low Speed Giromill
Rotor Height; Radius 20 ft | 6.1 m; 2 ft radius | 0.6 m
Swept Area 80 sq ft | 7.43 sq m
Max Rotor Speed 500 RPM*
Peak Tip Speed Ratio 2.8
Speed Control Dual Redundant: passive aerodynamic; electronic
Wind Tracking Instantaneous
Electronics
Generator High Efficiency Brushless Permanent Magnet
Inverter Custom Integrated Grid Tie 120 VAC 60 Hz
Inverter Certification ETL: Meets IEEE 1547.1; UL 1741
Performance Monitor Integrated Wireless Zigbee Modem
Wind Ratings
Cut-in Wind Speed 9 mph | 4 m/s
AEP Average Wind Speed 12 mph | 5.4 m/s
IPR Rated Wind Speed 25 mph |11.2 m/s
Survival Wind Speed 100 mph | 45 m/s
Construction
Foundation Poured Concrete
Foundation Size 2 ft diameter by 6 ft base*
Rotor Material Aircraft Grade Extruded Aluminum
Monopole/Structure Material Recycled High Grade Steel
Coatings Corrosion-resistant industrial grade paint
*Notes: Performance data is based on initial test data and expected final test
results. Final testing is currently underway. AEP is based on assumptions,
including a Rayleigh wind speed distribution and sea level air density.
Foundation size may vary for non-standard soil conditions or non-standard
heights.
Test Data
Below are two charts showing test data on the Windspire. This product have
been tested comprehensively by many high profile wind testing areas to ensure
its productivity and endurance.
Annual Energy Production (AEP) 2000 kWh*
Instantaneous Power Rating (IPR) 1.2 kW (1200 watts)*
Standard Unit Height 30 ft | 9.1 m
Total Weight 600 lb | 273 kg
Color Soft Silver
Sound imperceptible @ 10 mph;
8.8dB above ambient @ 50 mph
Warranty 5 year limited warranty
Rotor
Rotor Type Vertical Axis - Low Speed Giromill
Rotor Height; Radius 20 ft | 6.1 m; 2 ft radius | 0.6 m
Swept Area 80 sq ft | 7.43 sq m
Max Rotor Speed 500 RPM*
Peak Tip Speed Ratio 2.8
Speed Control Dual Redundant: passive aerodynamic; electronic
Wind Tracking Instantaneous
Electronics
Generator High Efficiency Brushless Permanent Magnet
Inverter Custom Integrated Grid Tie 120 VAC 60 Hz
Inverter Certification ETL: Meets IEEE 1547.1; UL 1741
Performance Monitor Integrated Wireless Zigbee Modem
Wind Ratings
Cut-in Wind Speed 9 mph | 4 m/s
AEP Average Wind Speed 12 mph | 5.4 m/s
IPR Rated Wind Speed 25 mph |11.2 m/s
Survival Wind Speed 100 mph | 45 m/s
Construction
Foundation Poured Concrete
Foundation Size 2 ft diameter by 6 ft base*
Rotor Material Aircraft Grade Extruded Aluminum
Monopole/Structure Material Recycled High Grade Steel
Coatings Corrosion-resistant industrial grade paint
*Notes: Performance data is based on initial test data and expected final test
results. Final testing is currently underway. AEP is based on assumptions,
including a Rayleigh wind speed distribution and sea level air density.
Foundation size may vary for non-standard soil conditions or non-standard
heights.
Test Data
Below are two charts showing test data on the Windspire. This product have
been tested comprehensively by many high profile wind testing areas to ensure
its productivity and endurance.
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Much of the information in the FAQ section was obtained directly from the Mariah Power website with modification pertinent to the Midwest area
Business Contact Information
Phone: 815-471-2020
Email: Ben@angelwindenergy.com
Mail: Angel Wind Energy
113 N Pine
Onarga IL 60955
Phone: 815-471-2020
Email: Ben@angelwindenergy.com
Mail: Angel Wind Energy
113 N Pine
Onarga IL 60955
